WASHINGTON -- In preparation for a future where parts and tools can be
printed on demand in space, NASA and Made in Space Inc. of Mountain
View, Calif., have joined to launch equipment for the first 3-D
microgravity printing experiment to the International Space Station.
If successful, the 3-D Printing in Zero G Experiment (3-D Print) will be the first device to manufacture parts in space. 3-D Print will use extrusion additive manufacturing, which builds objects, layer by layer, out of polymers and other materials. The 3-D Print hardware is scheduled to be certified and ready for launch to the space station next year.
"As NASA ventures further into space, whether redirecting an asteroid or sending humans to Mars, we'll need transformative technology to reduce cargo weight and volume," NASA Administrator Charles Bolden said during a recent tour of the agency's Ames Research Center at Moffett Field, Calif. "In the future, perhaps astronauts will be able to print the tools or components they need while in space."
NASA is a government leader in 3-D printing for engineering applications. The technology holds tremendous potential for future space exploration. One day, 3-D printing may allow an entire spacecraft to be manufactured in space, eliminating design constraints caused by the challenges and mass constraints of launching from Earth. This same technology may help revolutionize American manufacturing and benefit U.S. industries.
"The president's Advanced Manufacturing Initiative cites additive manufacturing, or '3-D printing,' as one of the key technologies that will keep U.S. companies competitive and maintain world leadership in our new global technology economy," said Michael Gazarik, NASA's associate administrator for space technology in Washington. "We're taking that technology to new heights, by working with Made in Space to test 3-D printing aboard the space station. Taking advantage of our orbiting national laboratory, we'll be able to test new manufacturing techniques that benefit our astronauts and America's technology development pipeline."
In addition to manufacturing spacecraft designs in orbit, 3-D printers also could work with robotic systems to create tools and habitats needed for human missions to Mars and other planetary destinations. Housing and laboratories could be fabricated by robots using printed building blocks that take advantage of in-situ resources, such as soil or minerals. Astronauts on long-duration space missions also could print and recycle tools as they are needed, saving mass, volume and resources.
"The 3-D Print experiment with NASA is a step towards the future," said Aaron Kemmer, CEO of Made in Space. "The ability to 3-D print parts and tools on demand greatly increases the reliability and safety of space missions while also dropping the cost by orders of magnitude. The first printers will start by building test items, such as computer component boards, and will then build a broad range of parts, such as tools and science equipment."
Made in Space previously partnered with NASA through the agency's Flight Opportunities Program to test its prototype 3-D Print additive manufacturing equipment on suborbital simulated microgravity flights. NASA's Flight Opportunities Program offers businesses and researchers the ability to fly new technologies to the edge of space and back for testing before launching them into the harsh space environment.
For this mission, Made in Space was awarded a Phase III small business innovation and research contract from NASA's Marshall Space Flight Center in Huntsville, Ala. After flight certification, NASA plans to ship 3-D Print to the space station aboard an American commercial resupply mission. NASA is working with American industry to develop commercially-provided U.S. spacecraft and launch vehicles for delivery of cargo -- and eventually crew -- to the International Space Station.
For more information about Made in Space, visit:
If successful, the 3-D Printing in Zero G Experiment (3-D Print) will be the first device to manufacture parts in space. 3-D Print will use extrusion additive manufacturing, which builds objects, layer by layer, out of polymers and other materials. The 3-D Print hardware is scheduled to be certified and ready for launch to the space station next year.
"As NASA ventures further into space, whether redirecting an asteroid or sending humans to Mars, we'll need transformative technology to reduce cargo weight and volume," NASA Administrator Charles Bolden said during a recent tour of the agency's Ames Research Center at Moffett Field, Calif. "In the future, perhaps astronauts will be able to print the tools or components they need while in space."
NASA is a government leader in 3-D printing for engineering applications. The technology holds tremendous potential for future space exploration. One day, 3-D printing may allow an entire spacecraft to be manufactured in space, eliminating design constraints caused by the challenges and mass constraints of launching from Earth. This same technology may help revolutionize American manufacturing and benefit U.S. industries.
"The president's Advanced Manufacturing Initiative cites additive manufacturing, or '3-D printing,' as one of the key technologies that will keep U.S. companies competitive and maintain world leadership in our new global technology economy," said Michael Gazarik, NASA's associate administrator for space technology in Washington. "We're taking that technology to new heights, by working with Made in Space to test 3-D printing aboard the space station. Taking advantage of our orbiting national laboratory, we'll be able to test new manufacturing techniques that benefit our astronauts and America's technology development pipeline."
In addition to manufacturing spacecraft designs in orbit, 3-D printers also could work with robotic systems to create tools and habitats needed for human missions to Mars and other planetary destinations. Housing and laboratories could be fabricated by robots using printed building blocks that take advantage of in-situ resources, such as soil or minerals. Astronauts on long-duration space missions also could print and recycle tools as they are needed, saving mass, volume and resources.
"The 3-D Print experiment with NASA is a step towards the future," said Aaron Kemmer, CEO of Made in Space. "The ability to 3-D print parts and tools on demand greatly increases the reliability and safety of space missions while also dropping the cost by orders of magnitude. The first printers will start by building test items, such as computer component boards, and will then build a broad range of parts, such as tools and science equipment."
Made in Space previously partnered with NASA through the agency's Flight Opportunities Program to test its prototype 3-D Print additive manufacturing equipment on suborbital simulated microgravity flights. NASA's Flight Opportunities Program offers businesses and researchers the ability to fly new technologies to the edge of space and back for testing before launching them into the harsh space environment.
For this mission, Made in Space was awarded a Phase III small business innovation and research contract from NASA's Marshall Space Flight Center in Huntsville, Ala. After flight certification, NASA plans to ship 3-D Print to the space station aboard an American commercial resupply mission. NASA is working with American industry to develop commercially-provided U.S. spacecraft and launch vehicles for delivery of cargo -- and eventually crew -- to the International Space Station.
For more information about Made in Space, visit:
NASA's Space Technology Mission Directorate leads the agency's participation in the president's National Network for Manufacturing Innovation. The directorate's Game Changing Development program leads the agency's efforts in 3-D printing. For more information about the directorate, which is innovating, developing, testing and flying hardware for use in NASA's future missions, visit:
MADE IN SPACE AND NASA TO SEND FIRST 3D PRINTER INTO SPACE.-
MOUNTAIN
VIEW, Calif. — To prepare for a future where parts can be built
on-demand in space, Made in Space, the space manufacturing company, has
partnered with NASA’s Marshall Space Flight Center to launch the first
3D printer to space.
Made in Space’s customized 3D printer will be the first device to manufacture parts away from planet Earth. The 3D Printing in Zero-G Experiment will validate the capability of additive manufacturing in zero-gravity.
“Imagine an astronaut needing to make a life-or-death repair on the International Space Station,” said Aaron Kemmer, CEO of Made in Space. “Rather than hoping that the necessary parts and tools are on the station already, what if the parts could be 3D printed when they needed them?”
All space missions today are completely dependent on Earth and the launch vehicles that send equipment to space. The greater the distance from Earth and the longer the duration, the more difficult it will be to resupply materials.
“As NASA ventures further into space, whether redirecting an asteroid or sending humans to Mars, we’ll need transformative technology to reduce cargo weight and volume,” NASA Administrator Charles Bolden said during a recent tour of the agency’s Ames Research Center at Moffett Field, Calif. “In the future, perhaps astronauts will be able to print the tools or components they need while in space.”
The Made in Space and NASA team envisions a future where space missions can be virtually self-sufficient and manufacture most of what they need in space. This includes such things as consumables, common tools, and replacements for lost or broken parts and eventually even such things as CubeSats (small, deployable satellites).
“The 3D printing experiment with NASA is a step towards the future. The ability to 3D print parts and tools on-demand greatly increases the reliability and safety of space missions while also dropping the cost by orders of magnitude,” said Kemmer. “The first printers will start by building test coupons, and will then build a broad range of parts, such as tools and science equipment.”
Both Made in Space and NASA view the space station as the place to initiate the journey of in-space manufacturing.
“We’re taking additive manufacturing technology to new heights, by working with Made in Space to test 3D printing aboard the space station,” said Michael Gazarik, NASA’s associate administrator for space technology in Washington. “Taking advantage of our orbiting national laboratory, we’ll be able to test new manufacturing techniques that benefit our astronauts and America’s technology development pipeline.”
In preparation for the 2014 launch, Made in Space tested a diverse array of 3D printing technologies in zero-gravity in 2011 and is conducting additional tests this year. These microgravity tests provide the initial research that fed into the developments for the 3D Print experiment. Made in Space will be doing additional microgravity tests later this year.
The Made in Space 3D Printer is built specifically to handle the environmental challenges of space and uses extrusion additive manufacturing, which builds objects layer by layer out of polymers and other materials.
The primary goal of the experiment is to serve as a technology demonstration to verify the data collected from multiple parabolic flights that 3D printed parts in microgravity are equitable to earth-based parts. For this mission, Made in Space was awarded a Phase III Small Business Innovation and Research Contract.
The hardware is scheduled to be certified and ready for launch to the International Space Station in 2014. The ISS is a fully operating National Laboratory where commercial, international, and academic partnerships abound.
“The public has been hearing about what this 3D printing technology can do, but most people haven’t seen a genuine impact on their lives yet,” said Kemmer. “Space is one of the key places where humanity will see the first impact of this incredible technology.”
For more information about Made in Space, visit:
http://www.madeinspace.us
For more information about NASA Marshall Space Flight Center, visit:
http://www.msfc.nasa.gov
###
Images: There are 5 images and our logo available to you. The image references with caption descriptions are below.
Made in Space’s customized 3D printer will be the first device to manufacture parts away from planet Earth. The 3D Printing in Zero-G Experiment will validate the capability of additive manufacturing in zero-gravity.
“Imagine an astronaut needing to make a life-or-death repair on the International Space Station,” said Aaron Kemmer, CEO of Made in Space. “Rather than hoping that the necessary parts and tools are on the station already, what if the parts could be 3D printed when they needed them?”
All space missions today are completely dependent on Earth and the launch vehicles that send equipment to space. The greater the distance from Earth and the longer the duration, the more difficult it will be to resupply materials.
“As NASA ventures further into space, whether redirecting an asteroid or sending humans to Mars, we’ll need transformative technology to reduce cargo weight and volume,” NASA Administrator Charles Bolden said during a recent tour of the agency’s Ames Research Center at Moffett Field, Calif. “In the future, perhaps astronauts will be able to print the tools or components they need while in space.”
The Made in Space and NASA team envisions a future where space missions can be virtually self-sufficient and manufacture most of what they need in space. This includes such things as consumables, common tools, and replacements for lost or broken parts and eventually even such things as CubeSats (small, deployable satellites).
“The 3D printing experiment with NASA is a step towards the future. The ability to 3D print parts and tools on-demand greatly increases the reliability and safety of space missions while also dropping the cost by orders of magnitude,” said Kemmer. “The first printers will start by building test coupons, and will then build a broad range of parts, such as tools and science equipment.”
Both Made in Space and NASA view the space station as the place to initiate the journey of in-space manufacturing.
“We’re taking additive manufacturing technology to new heights, by working with Made in Space to test 3D printing aboard the space station,” said Michael Gazarik, NASA’s associate administrator for space technology in Washington. “Taking advantage of our orbiting national laboratory, we’ll be able to test new manufacturing techniques that benefit our astronauts and America’s technology development pipeline.”
In preparation for the 2014 launch, Made in Space tested a diverse array of 3D printing technologies in zero-gravity in 2011 and is conducting additional tests this year. These microgravity tests provide the initial research that fed into the developments for the 3D Print experiment. Made in Space will be doing additional microgravity tests later this year.
The Made in Space 3D Printer is built specifically to handle the environmental challenges of space and uses extrusion additive manufacturing, which builds objects layer by layer out of polymers and other materials.
The primary goal of the experiment is to serve as a technology demonstration to verify the data collected from multiple parabolic flights that 3D printed parts in microgravity are equitable to earth-based parts. For this mission, Made in Space was awarded a Phase III Small Business Innovation and Research Contract.
The hardware is scheduled to be certified and ready for launch to the International Space Station in 2014. The ISS is a fully operating National Laboratory where commercial, international, and academic partnerships abound.
“The public has been hearing about what this 3D printing technology can do, but most people haven’t seen a genuine impact on their lives yet,” said Kemmer. “Space is one of the key places where humanity will see the first impact of this incredible technology.”
For more information about Made in Space, visit:
http://www.madeinspace.us
For more information about NASA Marshall Space Flight Center, visit:
http://www.msfc.nasa.gov
###
Images: There are 5 images and our logo available to you. The image references with caption descriptions are below.
Posted in Online Press
Latest Updates
NASA makes the announcement:
"Another American High Frontier First: 3-D Manufacturing in Space" fb.me/2vbM8EiqU
Today team members Jason Dunn and Michael Snyder introduced NASA Administrator Charlie Bolden to the first 3D... fb.me/UnpqbzFW
Our hallway here are the NASA Ames Research Park is filled with companies building the technology from Star Trek.... fb.me/wMGwRPEG
Former astronauts articulate their experience of going to space and the overwhelming feelings of seeing the Earth... fb.me/2JUd8uvrQ
Today we celebrate 52 years of humanity travelling to space.
As we do, the team at Made In Space is working... fb.me/2154R5VQX
NASA
Guillermo Gonzalo Sánchez Achutegui
ayabaca@gmail.com
ayabaca@hotmail.com
ayabaca@yahoo.com
Inscríbete en el Foro del blog y participa : A Vuelo De Un Quinde - El Foro!
No hay comentarios:
Publicar un comentario
Por favor deja tus opiniones, comentarios y/o sugerencias para que nosotros podamos mejorar cada día. Gracias !!!.