Abajo en la imagen observamos una recreación de una mano de un robot con un huevo, la nanotecnología hará posible que haya tacto sensible a la presión gracias a la creación de piel artificial. Fuente de imagen: Select Science News.
Engineers at UC Berkeley have developed a pressure-sensitive electronic material from semiconductor nanowires that could one day give new meaning to the term "thin-skinned.
Hola amigos: A VUELO DE UN QUINDE EL BLOG., con asombro hemos recibido esta noticia en el sentido que un equipo de científicos encabezados por Alí Javey de la Universidad de California en Los Estados Unidos de América, han logrado desarrollar el material electrónico sensible a la presión aprovechando la tecnología de la nanotecnología necesario como para dotar un tipo de piel artificial a los Robots de tal suerte que sean sensibles a los toques de cosas mediante el tacto. En cualquier momento de nuestra vida tendremos en nuestra casa un robot dotado de sensores electrónicos sensibles que nos indicará si nuestra agua está caliente o fría y muchos otros objetos que utilizamos en la vida diaria.
Aquí observamos en la imagen un fotografía facilitada por el equipo de ingeniería del equipo de Alí Javey y Kuniharu Takei de la Universidad de California en Berkely de Los Estados Unidos de América. Fuente: Astronomía, Física y Misiones Espaciales.
Aquí observamos en la imagen un fotografía facilitada por el equipo de ingeniería del equipo de Alí Javey y Kuniharu Takei de la Universidad de California en Berkely de Los Estados Unidos de América. Fuente: Astronomía, Física y Misiones Espaciales.INGENIERÍA: PIEL ARTIFICIAL PARA DOTAR DE TACTO A LOS ROBOTS, LOGRAN DESARROLLAR EN LA UNIVERSIDAD DE CALIFORNIA EN BERKELEY.-
Unos ingenieros de la Universidad de California en Berkeley han desarrollado un material electrónico sensible a la presión, hecho de nanocables semiconductores, que funciona de un modo parecido a como lo hace la piel humana. Este notable avance tecnológico significa incorporar un sentido del tacto en los robots.
La piel artificial creada por el equipo de Ali Javey es el primer material logrado a partir de semiconductores inorgánicos cristalinos de esta clase.Una piel artificial sensible al tacto ayudaría a superar un desafío clave en la robótica.
Permitiría a los robots regular mucho mejor que ahora la cantidad de fuerza necesaria para sostener y manipular una amplia gama de objetos.
Un objetivo a más largo plazo sería el de utilizar la piel artificial para restaurar el sentido del tacto en personas que usan prótesis en sustitución de extremidades amputadas.
Hacer que esas personas experimenten percepciones táctiles realistas a través de sus prótesis requerirá avances significativos en la integración de los sensores electrónicos en el sistema nervioso humano.
English Version:
ENGINEERS MAKE ARTIFICIAL SKIN OUT OF NANOWIRES:
""The idea is to have a material that functions like the human skin, which means incorporating the ability to feel and touch objects," said Ali Javey, associate professor of electrical engineering and computer sciences and head of the UC Berkeley research team developing the artificial skin.
The artificial skin, dubbed "e-skin" by the UC Berkeley researchers, is described in a Sept. 12 paper in the advanced online publication of the journal Nature Materials. It is the first such material made out of inorganic single crystalline semiconductors.
A touch-sensitive artificial skin would help overcome a key challenge in robotics: adapting the amount of force needed to hold and manipulate a wide range of objects.
"Humans generally know how to hold a fragile egg without breaking it," said Javey, who is also a member of the Berkeley Sensor and Actuator Center and a faculty scientist at the Lawrence Berkeley National Laboratory Materials Sciences Division. "If we ever wanted a robot that could unload the dishes, for instance, we’d want to make sure it doesn’t break the wine glasses in the process. But we’d also want the robot to be able to grip a stock pot without dropping it.
"A longer term goal would be to use the e-skin to restore the sense of touch to patients with prosthetic limbs, which would require significant advances in the integration of electronic sensors with the human nervous system.
Previous attempts to develop an artificial skin relied upon organic materials because they are flexible and easier to process.
"The problem is that organic materials are poor semiconductors, which means electronic devices made out of them would often require high voltages to operate the circuitry," said Javey. "Inorganic materials, such as crystalline silicon, on the other hand, have excellent electrical properties and can operate on low power. They are also more chemically stable. But historically, they have been inflexible and easy to crack. In this regard, works by various groups, including ours, have recently shown that miniaturized strips or wires of inorganics can be made highly flexible — ideal for high performance, mechanically bendable electronics and sensors.
"The UC Berkeley engineers utilized an innovative fabrication technique that works somewhat like a lint roller in reverse. Instead of picking up fibers, nanowire "hairs" are deposited.
The researchers started by growing the germanium/silicon nanowires on a cylindrical drum, which was then rolled onto a sticky substrate. The substrate used was a polyimide film, but the researchers said the technique can work with a variety of materials, including other plastics, paper or glass. As the drum rolled, the nanowires were deposited, or “printed,” onto the substrate in an orderly fashion, forming the basis from which thin, flexible sheets of electronic materials could be built.
In another complementary approach utilized by the researchers, the nanowires were first grown on a flat source substrate, and then transferred to the polyimide film by a direction-rubbing process.
For the e-skin, the engineers printed the nanowires onto an 18-by-19 pixel square matrix measuring 7 centimeters on each side. Each pixel contained a transistor made up of hundreds of semiconductor nanowires. Nanowire transistors were then integrated with a pressure sensitive rubber on top to provide the sensing functionality. The matrix required less than 5 volts of power to operate and maintained its robustness after being subjected to more than 2,000 bending cycles.
The researchers demonstrated the ability of the e-skin to detect pressure from 0 to 15 kilopascals, a range comparable to the force used for such daily activities as typing on a keyboard or holding an object. In a nod to their home institution, the researchers successfully mapped out the letter C in Cal.
"This is the first truly macroscale integration of ordered nanowire materials for a functional system — in this case, an electronic skin," said study lead author Kuniharu Takei, post-doctoral fellow in electrical engineering and computer sciences. "It’s a technique that can be potentially scaled up. The limit now to the size of the e-skin we developed is the size of the processing tools we are using."(Photo: Ali Javey and Kuniharu Takei, UC Berkeley)
Select Science News.
Guillermo Gonzalo Sánchez Achutegui
No hay comentarios:
Publicar un comentario